How to Flash Samsung Galaxy J7 firmware
1)
First, enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer
option>. To enable Developer Options, go to About phone and tap the Build
Number 7 times.
2) Now
download the Stock Firmware from above.
3) Now
Download the Odin tool from above and extract the zip file.
4) Run
the Odin_v3.10.7.exe file on your PC.
5)
Connect your Galaxy J7 to your PC with the data cable and reboot into the
Download/Odin mode.
6) To
enter into download mode turn off your phone and press and hold the ‘Home + Volume
Down + Power’ buttons together until you see the download
mode screen.
7) Once you enter into Download mode, you see an ID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.
8) If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.
9) Now
locate and add the stock firmware file .tar or .md5 file (you downloaded
from above) to the AP/PDA tab in
Odin.
10) Make
sure that only these two options are tick “Auto Reboot” and
“F.Reset
Time“
11) Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen. This step will Flash Stock Firmware on Galaxy J7.
So this is the complete guide to Install Stock Firmware on Galaxy J7 in easy steps.
Samsung Galaxy J7 Firmware: Download