Samsung Galaxy J5 Firmware

How to Flash Samsung Galaxy J5 Firmware

1) First, enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.

2) Now download the Stock Firmware from below.

3) Now Download the Odin tool from above and extract the zip file.

4) Run the Odin_v3.10.7.exe file on your PC.

5) Connect your Galaxy J5 to your PC with the data cable and reboot into the Download/Odin mode.

6) To enter into download mode turn off your phone and press and hold the ‘Home + Volume Down + Power’ buttons together until you see the download mode screen.

7) Once you enter into Download mode, you see an ID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.

8) If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.

9) Now locate and add the stock firmware file .tar or .md5 file (you downloaded from above) to the AP/PDA tab in Odin.

10) Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time

11) Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen. This step will Flash Stock Firmware on Galaxy Note 7.

So this is the complete guide to Install Stock Firmware on Galaxy J5 in easy steps.

Odin Software — Download | Odin3 v3.10.7

Samsung USB Drivers:
Samsung Galaxy J5 Firmware:
 Galaxy J5 SM-J500FNDownload
Galaxy J5 SM-J500MDownload
Galaxy J5 SM-J500HDownload
Galaxy J5 SM-J500FDownload
Galaxy J5 SM-J500GDownload
Galaxy J5 SM-J5008Download
Galaxy J5 SM-J500YDownload
Galaxy J5 SM-J500N0Download